Useful Cosmetic Packaging Boxes Guide

Different types of materials can be used for cosmetic packaging

Cosmetic box packaging materials are divided into main containers and auxiliary materials. The main containers are usually plastic bottles, glass bottles, tubes, vacuum bottles, etc. Auxiliary materials are usually: cosmetic packaging boxes, inner trays.


Useful Cosmetic Packaging Boxes Guide (II)


Plastic bottles

1. Plastic bottles are generally made of PP, PE, ABS, ABS, acrylic, PET, etc.

2. PET material is environmentally friendly, lightweight, unbreakable, and chemically resistant. Transparent. Products made of this material can be made into pearlescent, colored, magnetic white.

Widely used in the installation of jelly water. Bottle mouth is generally standard 16 #, 18 #, 22 #, 24 # caliber, can be used with the pump head.

3. Acrylic material is mostly used for injection molding bottles, chemical resistance is poor, generally can not be directly loaded products, need to be equipped with an inner compartment.

Can not be completely filled to avoid cream into the middle of the main meal and the bottle to avoid cracking.

The requirements for transportation are very high.

4. AS vs. ABS.

AS has better transparency and toughness than ABS.

5. Australia mold development cost: blow mold $200-600, injection mold $1000-3000 ranging

Stainless steel molds will be more expensive than alloy molds, but very durable.

How many molds are needed and how many times the molds come out at a time depends on the production volume.

6. The starting quantity is generally 3000-10000 pieces, and the color can be customized.

Most people will choose the original color and magnetic white, or add pearl powder effect, although the bottle and cap will be the same color, but the color of the final product will be different according to the materials used in the bottle and cap.


Useful Cosmetic Packaging Boxes Guide (II)


Glass bottles

1. Cosmetic glass bottles are mainly divided into skin care products (creams, lotions), perfumes, essential oils, nail polish, mostly small capacity, less than 200ml.

2. Glass bottles are divided into wide-mouth bottles, narrow-mouth bottles, wide-mouth bottles are generally used for solid creams, it is appropriate to match the electrochemical aluminum cap or plastic cap, the cap can be used for color spray oil and other impacts.

Narrow-mouth bottles generally use lotions or water-based creams, it is appropriate to match the pump head. We need to pay attention to prevent the spring and ball rust, now most of the pump head will use glass beads.

3. Glass bottles are more consistent in the selection of materials, more shapes, rich processing techniques and diversified caps.

Common bottle shapes are cylindrical, oval, flat, prismatic, conical, etc.

4. Glass bottles such as hand mold, the capacity will have a little deviation. The product should be tested and the correct capacity label should be made.

5. Glass bottles with uneven thickness can easily lead to damage under cold conditions or be easily ruptured by squeezing the contents.

It should be filled with reasonable capacity that

During transportation, the glass bottle should be protected by single separation.

6. Commonly used glass bottles are generally in stock, such as finished oil bottles, plain bottles, frosted bottles, etc.

Glass bottle production cycle is long, the fastest 20 days, some delivery 45 days, the general order quantity of 5000 to 10000, the smaller the bottle type to do more, the cycle andmoment will be affected by the peak season, off-season.

7. cap process can be electrolytic aluminum engraving, hot stamping edge, etching pattern, matte color, in order to match the gasket and inner cap, it is best to use pressure-sensitive sheet to strengthen the sealing effect.

8. Finished oil bottles are usually brown or tinted and tinted frosted to keep the bottle away from light.

The cap has a safety ring that can be paired with an inner stopper or dropper, and perfume bottles are usually paired with a delicate spray pump head or plastic cap.


Useful Cosmetic Packaging Boxes Guide (II)



Choosing the Right 4-in-1 Integrated Air Compressor for Laser Cutter

What factors affect piston ring longevity?

Calacatta Quartz vs. Gray Quartz: Choosing the Perfect Countertop